Description

The TS-LSS2-L is built with high quality aluminum alloy and is black powder coated. It is designed to fit the 10.25″ Lowrance® LSS2 Structure Scan Transducer. This item does not fit the shorter Lowrance® LSS1 Structure Scan transducer. Use the TS-LSS-1 if you have the shorter LSS1 transducer. The sleek hydrodynamic design will cut through the water for less drag, reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

The TS-LSS2-L is approximately 10.25 long and cannot be installed on a trolling motor. If you wish to install an LSS2 transducer on your trolling motor use Transducer Shield® TS-LSS2-3D.

The TS-LSS2-L along with additional components can easily be installed on the side of a jackplate with an L Bracket, on the hole shot plate under the jackplate with a Wedge or on the boat set back under the transom with a Wedge.

Please note that when the transducer is attached to a set back, hole shot plate or the side of a jackplate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.