Description

Traxstech Vertical Rod Tree

Traxstech offers vertical rod trees with 2, 3 or 4 rod holders that slide into our mounting track system. If you use in-line planer boards for lead core, copper line or just long lining this is the ultimate rod holder system for you. Our exclusive post design allows independent rod holder adjustability. Each rod holder has six available positions in a 90-degree area for maximum spread of rod tips, allowing easier turns virtually tangle free. The concept of the vertical rod tree mounted as far forward as possible allows full gunwale for the board rods, divers, and corner downriggers, keeping the transom completely open for netting and resetting baits.We have also used this vertical tree in situations where space is limited and the top holders were used for boards and the bottom one for a diver rod.

Vertical Rod Tree Options

Vertical Rod Tree with 2 Rod Holders

• Part: #VBT-2
• The VBT-2 is from the bottom of the post to the top of it about 16” and has 2 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.

Vertical Rod Tree with 3 Rod Holders

• Part: #VBT-3
• The VBT-3 is from the bottom of the post to the top of it about 29” and has 3 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.

Vertical Rod Tree with 4 Rod Holders

• Part: #VBT-4
• The VBT-4 is from the bottom of the post to the top of it about 39” and has 4 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.

**Mounting Track not included**

Additional items we sell that will work with the VBT’s are the following:

• Vertical Beverage Holder
• Vertical Tool Holder
• Vertical Planar Board Caddies for Salmon and Walleye Boards
• Replacement Posts

The Traxstech Difference

Made in the USA All of our parts are engineered and assembled by hand in Chesaning, Michigan.	Signature Finish Signature textured finish adds durability to the solid machined aluminum components, hardens wear surface, offers a bright non-reflective finish, and is easy to clean.	It’s All We Do All of our products are produced in our state-of-the-art manufacturing facility. From deburring to CNC machining, we control every part of the production process.