Description

The LB-SM-10/12-RW L Bracket is built using high quality aluminum alloy, is black powder coated and includes stainless steel hardware. It is designed to fit a 10″ or 12″ Slidemaster jack plate.

Please remember that a transducer cannot be attached to an L Bracket without a Transducer Shield®.

On Skeeter ZX model boats, the hull turning chines interfere with the side viewing signal. To help this problem it is necessary to add an extension between the L Bracket and Transducer Shield®. Use a 1.5″ extension if your transducer is a Lowrance® LSS1, LSS2, Total Scan, 2-in-1, 3-in-1 or 3D or a Raymarine® Real Vision 3D or your Transducer Shield® is a TG-DS-8.4, TG-DS-9, TG-HG-8.5, TM-HX-3, TM-H8.3, TM-H7.1.

If you have a Bass Cat boat and your jack plate was installed by Bass Cat, a 1.5″ extension is required.

Please note that when the transducer is attached to a set back, hole shot plate or the side of a jackplate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.