A pump-out feature provides a convenient means of filling a tournament livewell weigh-in bag and also enables a livewell to be pumped out while the boat is still in the water or when moored at a dock overnight.

The Flow-Rite Pump-Out Aerator is the easiest, most efficient, and least expensive means of adding a pump-out system to any livewell system. It eliminates the need for additional diverting valves, cables, actuators, electrical connections and most of the plumbing required by other systems.

Simply install the Pump-Out Aerator in place of the standard spray head used with any recirculation pump or with any of our V3 or V4 control valves that include a “RECIRC” mode. It has two hose connections, one intake from the pump and one outlet for the discharge hose that will connect to the new discharge thru-hull fitting.

The two position head is pushed in to bring water into the livewell where it is recirculated and aerated by the air intake and venturi built into the head. Pull the head to the out or “pump-out” position to divert the water from the livewell to the discharge thru-hull. The head can also be rotated left or right to promote a desirable circular current within the livewell. The venturi will ensure that the maximum amount of oxygen allowed by ambient conditions will be provided to all levels and areas of the livewell.

• Leave approximately 3/16” of threads on thru-hull exposed for locking nut
• Venturi Air-Intake Allows air to be brought in and mixed with water
• Discharge nozzle can be rotated to provide circulation in the livewell
• Aerator Head: Simply pull to pump-out and push to aerate
• Hose, clamps, and discharge thru hull required (not included)