Flow Rite Control Valve System 3 Barbed

Description

Flow Rite Control Valve System 3 Barbed

SKU#:

MV-03-FN01 – Front Approach – Control Valve, Orange Arm, System 3 Front, # V3F, Barbed
MV-03-RN01 – Rear Approach – Control Valve, Green Arm, System 3 Rear, # V3R, Barbed
MV-03-FP01 – Front Approach – Control Valve, Orange Arm, System 3 Front, PEF, # V3FP
MV-03-RP01 – Rear Approach – Control Valve, Green Arm, System 3 Rear, PEF, # V3RP

Details:

Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed “RECIRC” position. By mounting the pump to the valve body, the operator only has to decide whether he wants his livewell functioning or empty. When the first fish is caught, place the valve in the “AUTO” position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up.

When the boat is put on plane, the valve’s check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. All this is accomplished without any operator assistance.

For those times when outside water is not wanted or available, such as, adding ice, livewell additives, going through locks, traveling to out of water weigh-ins, dockside refueling or using our optional Pump-out / Venturi Aerator, place the valve in the “RECIRC” position.

To empty, simply turn off the pump and move the valve to the “EMPTY” position for gravity draining.

PEF

Only specific PEF for higher profile walleye and bay boats where the livewell overflow is 8″-12″ above Lake level. If it it’s more than 12″ use the V4 valve. PEF is not generally required for low profile bass boats.

While off plane, in the Auto position, water enters the valve from both the livewell drain and the transom thru-hull. As the water level in the livewell increases so does the pressure on the transom check feature of the valve, reducing the ration of fresh to recirculated water. When this pressure is too great, PEF insures that enough fresh water is added to force the upper used water out.

Livewell Control Systems Guide

Valve Cable Approach Guide

FAQ’S

How does a flow Rite valve work?

In the CLOSED position, the valve is shut off on both sides and water is not allowed to pass in either direction. In the FILL position, the pump receives outside water only. When on plane, the AUTO position allows water to enter the valve and pump from both outside and from the livewell.

How does a live well work?

Livewells are tanks found on many fishing boats, deck boats, and pontoons that are used to keep bait and caught fish alive. It works by pumping fresh water from the lake you are boating on into the tank and then back out. This flow of water keeps the water fresh and oxygenated, allowing fish to breath properly.

Additional information

Cable Approach:	Front, Rear
PEF:	Yes, No