Description

The SBB-5 Spring Back Bracket® (Pat. 9,361,873) is built with stainless steel, includes all stainless hardware and has the following dimensions: Depth 1” x Height 2.5” x Width 3”.

The Spring Back Bracket now includes two double torsion springs. The second spring was added as a standard feature to accommodate the longer and heavier transducers on the market today. Another new feature is a stainless steel two prong “fork”. The “fork” is used to keep the top and bottom brackets together when dis-assembling and assembling the axle and springs. The Spring Back Bracket will safeguard the transducer from submerged objects by pivoting up and automatically returning to normal position once force is released, which in turn protects the transducer from underwater obstruction. The Spring Back Bracket is ideal for aluminum, fiberglass and polyethylene boats. It’s versatile to attach a transducer to the boat stern (back/transom area). Installation instructions and hardware are included in the package.

The instructions refer to the use of an “axle assembling tool” which we deem an essential tool. The tool is threaded on one end to remove and re-install the axle and springs. If your choose not to purchase this optional tool, a #2 phillips screw driver can be used to push the axle through the bracket. The axle assembling tool is highly recommended when purchasing the Spring Back Bracket.

More Features and Benefits :

• It can be used with most transom style transducers including Side Image and Structure Scan.
• Safeguard and improve the life expectancy of the transducer arm / knuckle.
• The top bracket is pre-drilled to accept a variety of transducer factory mounting hardware.
• The bottom bracket has a selection of slots and holes to fine tune the transducer position and finally lock down.

Optional Items :

• Axle Assembling Tool – a highly recommended and very helpful driver tool with a threaded end to remove and install the axle rod in the Spring Back Bracket.
• Stainless Steel Back Plate – highly recommended for hard to reach / tight to work in areas. It can be used if a minimum clearance of 3-1/2” on one side and 6-1/2” on the other side of the Spring Back Bracket cannot be achieved. Using this item will make your life so much easier to have everything assembled on the workbench or holding in a vice and then simply attaching the assembly onto the boat surface.
• Armor Plate – to protect the transducer from side to side and front to back impact. To purchase an Armor Plate, go to the Armor Plate section to choose the correct one to suit your transducer.
• Block-HDSI – designed specifically for the Humminbird HDSI transducer XHS-9-HDSI-180-T this block will help to prevent the factory bracket from pivoting upward on the transducer-arm when struck by an underwater object.

It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order. If you need assistance, please call or email and we will assist you in ordering the correct item.