Description
Traxstech Aluminum Backer Plate
Our aluminum backer plates are recommended if you are going to install a downrigger or have thin walls on your boat. The added support from a backer plate is recommended for our 6″, 12″, 18″, and 24″ mounting tracks. Our longer tracks usually do not require a backer plate because they spread the strength out over the length of the track.
If you wish to use a backer plate with a piece of mounting track 36 inches or longer, we recommend that you use a 3 inch plate.
Frequently Asked Questions:
Q. How many backer plates/what size do I need?
A. If you are installing a 6″, 12″, 18″, 24″ or 36″ track, you need to order just one backing plate in the corresponding size. If you are installing anything over 36″ and wish to use a backing plate as well, you must order the 3″ backing plate – (Part: #3-BP). The other size backing plates will not line up properly with the mounting holes on your tracks.
Mounting Track | Backer Plates Needed |
---|---|
6” (MT-6 or BMT-6) | One (1) 6″ Plate (#6-BP) |
12” (MT-12 or BMT-12) | One (1) 12″ Plate (#12-BP) |
18” (MT-18 or BMT-18) | One (1) 18″ Plate (#18-BP) |
24” (MT-24 or BMT-24) | One (1) 24″ Plate (#24-BP) |
36” (MT-36 or BMT-36) | Five (5) 3″ plates (#3-BP) |
48” (MT-48 or BMT-48) | Five (5) 3″ Plates (#3-BP) |
60” (MT-60 or BMT-60) | Seven (7) 3″ Plates (#3-BP) |
72” (MT-72 or BMT-72) | Eight (8) 3″ Plates (#3-BP) |
Information complémentaire
Poids | N/A |
---|---|
Dimensions | N/A |
Length | 3 inch, 6 inch, 12 inch, 18 inch, 24 inch |